In an urban setting, any civil engineering project has to be undertaken with the minimum of interference. This requires using a reputable and reliable civil engineering company. Trenches and drilling may have to be undertaken, in the leafy suburbs or a busy high street. Making the right decision about which company to use may boil down to simply looking at efficiency and cost issues. But given the potential effect any work might have in an urban setting, then environmental factors and due concern for health and safety could also be critical. A civil engineering company would have to have an excellent track record and be able to deliver a professional service. Therefore, consider using civil construction companies Melbourne has today, if you’re here in Australia, that can provide the expertise and equipment necessary to carry out the work that might be required.
Services on offer.
Civil Construction Companies Melbourne has today may offer the following services: excavations, non destructive digging, trenching and directional drilling.
It is important to have the correct equipment available for work of this kind. Consequently, Civil construction companies Melbourne has today have this equipment. The machinery ranges from 1.5 tonne to 35 tonne excavators. Each job and site will be looked at individually. The equipment and procedures used will match the requirements of each site. This could cover drainage project, utilities such as Gas, piping, sewage, irrigation, telecommunications cabling, and projects involving pipe lines. Road and rail works are also undertaken, including rail signaling and road crossings.
Non Destructive Digging (NDD)
It could be important, on some sites, that any excavation is focused solely on where it is needed and does not disturb or damage anything in the surrounding area. An FX powered 800 gallon vacuum extractor is used along with a hydraulic boon. This will mean that features such as building foundations, tree roots, or existing cabling and drainage piping will not be damaged or affected. Thus achieving a minimal environmental impact on any site.
The “open cut Ditch Witch chain trenching system” can cut trenches of between 150 to 450mm in width to a depth of 1.8 meters.
Therefore, Direction Drilling Melbourne companies have today can also provide this very precise system. As with non destructive digging equipment, directional drilling is targeted exactly where it is needed. In any residential area, this will have a minimal effect on any pavements or pathways.
To date, Melbourne directional drilling processes have been used for the introduction of the National Broad Band Network (NBN), and other communication projects. This system has proved useful in the servicing and maintenance of gas, water and electricity mains systems. Another important utility is sewage piping and “lead ins”. Using directional drilling has proved effective with these systems, where any damage could have a high environmental impact. With irrigation piping and installation, directional drilling can be very specific. Drilling again has only been used where it is needed
Each site will present different problems. A solution can be found for these. But this will be “turnkey”, a complete solution. Once the task has been thoroughly investigated and reviewed then the civil engineers will ensure that the job is completed thoroughly and also with a minimal environmental impact in each case.
For more information on these Civil Contractors, please visit:
Tel: 0430 411 302